<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>博客最新信息Rss订阅 -- EDN电子设计技术</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>20</ttl><pubDate>Sun, 21 Mar 2010 05:32:18 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>专利下来了，真不容易哈！</title><pubDate>Fri, 19 Mar 2010 16:43:43 GMT</pubDate><link>http://blog.ednchina.com/weitongguo/850653/message.aspx</link><description>原帖地址：http://blog.ednchina.com/weitongguo/175309/message.aspx有感兴趣的同志可以联系生产哈！</description><comments></comments><guid>http://blog.ednchina.com/weitongguo/850653/message.aspx</guid><category></category><author>weitongguo</author></item><item><title>听课建议</title><pubDate>Thu, 18 Mar 2010 15:55:10 GMT</pubDate><link>http://blog.ednchina.com/kuaixuexi/831091/message.aspx</link><description>黄老师做为督导员听课建议：1、语速快了，导致停顿好像卡壳。上课和说话又一定的区别：要慢些，拖长音，这样留时间让学生思考。（娓娓道来）2、板书技能要加强。字小，后面看不清。3、加强互动。4、加强专业底蕴。</description><comments></comments><guid>http://blog.ednchina.com/kuaixuexi/831091/message.aspx</guid><category></category><author>kuaixuexi</author></item><item><title>面向大众的混合信号示波器</title><pubDate>Thu, 18 Mar 2010 09:39:58 GMT</pubDate><link>http://blog.ednchina.com/happytesting/828556/message.aspx</link><description>最近在浏览EETimes网站时，恰巧看到一篇有关混合信号示波器的评论文章，作者Jack Ganssle是专注于嵌入式系统开发问题的讲师和顾问。一口气读完觉得实在写得有趣，特别有感于作者的那种“发烧友”情结，不亚于现在的“苹果”狂热者。我将它翻译了和大家分享，如果有兴趣看原文的朋友可参考：http:/</description><comments></comments><guid>http://blog.ednchina.com/happytesting/828556/message.aspx</guid><category></category><author>happytesting</author></item><item><title>串口定义一定要搞定</title><pubDate>Wed, 17 Mar 2010 21:02:08 GMT</pubDate><link>http://blog.ednchina.com/ilove314/817296/message.aspx</link><description>串口定义一定要搞定 这个串口定义之前好像在坛子里也看过有人图文并茂的戏说一番，只不过这一次自己遇到的问题自己解决得更深刻一些罢了。DB9的串口相信所有人都见过，搞电子设计的没自己动手做过这玩意那也挺不可思议的了。特权同学还依稀记得自己设计的第一个51单片机下载电路用的串口定义反了，结果用的串口插座还</description><comments></comments><guid>http://blog.ednchina.com/ilove314/817296/message.aspx</guid><category></category><author>ilove314</author></item><item><title>都是7805惹得祸，datasheet也有可能误导你</title><pubDate>Wed, 17 Mar 2010 19:52:29 GMT</pubDate><link>http://blog.ednchina.com/zxzy007/816438/message.aspx</link><description>这几天调试DSP系统的电源模块，大体思路是这样，引入12V的开关电源通过L7805转换成5V,再通过TPS75733转换成3.3V,因为按照datasheet上的说明做的板子，所以直接将7805连上，接上后发现烫的厉害，而且得到的电压明显不对，更严重的事把我TPS75733也烧坏了（当然这是后来发现</description><comments></comments><guid>http://blog.ednchina.com/zxzy007/816438/message.aspx</guid><category></category><author>zxzy007</author></item><item><title>探秘中国IC设计公司发展迷局(一)</title><pubDate>Wed, 17 Mar 2010 11:20:39 GMT</pubDate><link>http://blog.ednchina.com/tiantiantanxin/811828/message.aspx</link><description>2000年到2009年十年间，中国的IC设计公司的命运跌宕起伏。十年来，始终没有一家IC公司能够在中国市场扛起旗帜，可谓是各领风骚一二年。天天谈芯成立于1999年10月的中星微电子，除了CMOS数码图像处理芯片“星光N号”取得成功，公司依靠“星光中国芯工程”的光环，还是吸引了不少人的目光。在公司上市</description><comments></comments><guid>http://blog.ednchina.com/tiantiantanxin/811828/message.aspx</guid><category></category><author>tiantiantanxin</author></item><item><title>数值信号模拟信号的图形表达</title><pubDate>Wed, 17 Mar 2010 10:53:58 GMT</pubDate><link>http://blog.ednchina.com/hgg5738/811789/message.aspx</link><description>当然了最后两个图，短线可以趋向极限短。呵呵 其实短线再短和点看起来就是一样的了。</description><comments></comments><guid>http://blog.ednchina.com/hgg5738/811789/message.aspx</guid><category></category><author>hgg5738</author></item><item><title>三极管HFE与β的关系</title><pubDate>Wed, 17 Mar 2010 09:41:02 GMT</pubDate><link>http://blog.ednchina.com/thinkker/811733/message.aspx</link><description>hfe是三极管H参数，全称“共发射极低频小信号输出交流短路电流放大系数”，在等效四端网络中又叫“h21”。β是Ic与Ib函数关系的普遍表达式，尤其特指在晶体管基区中电流的分配关系。无论在教科书还是在应用中，这种区别没有得到有价值的显现。两者在概念上有所差异，但数值上相当一致，在大多情况下可不加区分。</description><comments></comments><guid>http://blog.ednchina.com/thinkker/811733/message.aspx</guid><category></category><author>thinkker</author></item><item><title>中国股市暴跌的原因八月份股市暴跌原因</title><pubDate>Wed, 17 Mar 2010 02:50:56 GMT</pubDate><link>http://blog.ednchina.com/gubpp06/805017/message.aspx</link><description>美国波士顿国际水产及水产技术展于3月14日在美国波士顿隆重开幕。该展简称“波士顿国际渔业展”，自1982年首次举办以来迄今已举办了29届；是目前全球水产界影响力最大、知名度最高的专业水产贸易展，是世界三大水产展会之一。波士顿国际渔业展参展品种涵盖了渔业领域的各个方面：不但有保鲜品、冷冻品、鲜活品；还</description><comments></comments><guid>http://blog.ednchina.com/gubpp06/805017/message.aspx</guid><category></category><author>gubpp06</author></item><item><title>今天很郁闷</title><pubDate>Tue, 16 Mar 2010 23:53:29 GMT</pubDate><link>http://blog.ednchina.com/zhengshitao/802639/message.aspx</link><description>本来打算写一些相关的RF项目的事情，后面发现板子出现了毛病，PL2303与电脑的连接出现问题，同时在相关的电源方面有个小bug被我发现，调试两个小时不见效果。。特此发帖，以示郁闷。争取在这两天搞定这个问题。后面将有一系列的文章对于相关的RF进行分析和总结。。希望项目不会因此终结。祈祷，，，，加油啊</description><comments></comments><guid>http://blog.ednchina.com/zhengshitao/802639/message.aspx</guid><category></category><author>zhengshitao</author></item><item><title>STC单片机挂掉之后……</title><pubDate>Tue, 16 Mar 2010 23:43:32 GMT</pubDate><link>http://blog.ednchina.com/ytfdhb/802536/message.aspx</link><description>2010.03.16 星期二 晴 昨天用圈圈的USB开发板调程序，结果不小心弄了一个死循环，串口连续发送数据，这下可好，本来STC用的是串口下载程序的，这下，串口被死死的占着，一直不停的向主机发数据，结果STC软件打开，一点击下载软件直接关闭--用串口是下不成程序了。幸好我这还有一个编程器，把单片机</description><comments></comments><guid>http://blog.ednchina.com/ytfdhb/802536/message.aspx</guid><category></category><author>ytfdhb</author></item><item><title>时钟分频改为使能分频</title><pubDate>Tue, 16 Mar 2010 21:49:43 GMT</pubDate><link>http://blog.ednchina.com/wang5227004/801815/message.aspx</link><description> 一个模块的时序仿真是正确的，但当把这个模块放到顶层模块和其他模块一起仿真时，结果就出现了时序错误。我检查了一下，发现我的其他个时钟是由一个时钟分频得来的，我认为问题就在于此，我准备把时钟分频改为使能分频。就是说，在需要的时钟时刻，给予使能信号，使其它需要的操作在此时钟时刻进行；在其它的时钟时刻，不</description><comments></comments><guid>http://blog.ednchina.com/wang5227004/801815/message.aspx</guid><category></category><author>wang5227004</author></item><item><title>国内外物联网发展现状及存在问题（zt）</title><pubDate>Tue, 16 Mar 2010 19:20:46 GMT</pubDate><link>http://blog.ednchina.com/hxqhit/799762/message.aspx</link><description> --------------------------------------------------------------------------------------------- 几年前IBM率先提出了“服务科学 管理与工程”(SSME)，对一些工业已经较发达国家的经济结构转型起到了积极作</description><comments></comments><guid>http://blog.ednchina.com/hxqhit/799762/message.aspx</guid><category></category><author>hxqhit</author></item><item><title>我国IGBT器件发展中的问题</title><pubDate>Tue, 16 Mar 2010 16:29:20 GMT</pubDate><link>http://blog.ednchina.com/tiantiantanxin/796830/message.aspx</link><description>前面谈过我国功率半导体的话题，今天谈谈IGBT的情况。由于IGBT器件技术含量高，制造难度大，目前国内生产技术与国外先进水平存在较大差距，技术差距主要表现在：一、设计1、IGBT设计刚起步，水平还远远落后与国际大公司的水平，从PT向NPT发展。目前国内有设计能力的企业包括：北京时代民芯、常州宏微、嘉</description><comments></comments><guid>http://blog.ednchina.com/tiantiantanxin/796830/message.aspx</guid><category></category><author>tiantiantanxin</author></item><item><title>板级设计之殇—产业链缺失</title><pubDate>Tue, 16 Mar 2010 10:07:40 GMT</pubDate><link>http://blog.ednchina.com/yulzhu/793496/message.aspx</link><description> 谈这个话题，起于读“电路芯片化的思考”有感，Yicheng对我的博文中的一些观点有一些自己的看法。 在外企做国外的项目的支持工作，有个深刻的感受，就是询问某些国外的最新的元器件，连说明书都 要不过来，更不要说关键实验的测试数据，内部的技术文档之类。因此我们要不来的，国外的工程师 发个邮件可以要过来</description><comments></comments><guid>http://blog.ednchina.com/yulzhu/793496/message.aspx</guid><category></category><author>yulzhu</author></item><item><title>从“是放大电路还是积分电路”说起</title><pubDate>Mon, 15 Mar 2010 22:02:00 GMT</pubDate><link>http://blog.ednchina.com/xxmlyt/785958/message.aspx</link><description> 在童诗白、华成英合著的模拟电子技术基础中，有两个电路值得探讨。 如下共三个图，图一是第289页的内容，说本电路是负反馈放大电路，为了消除自激振荡加了电容C1做为超前补偿的。图二是322页的内容，说本电路是积分运算电路，用于波形变换。但是在323页原文又有这样一些话，“在使用电路中，为了防止低频信号</description><comments></comments><guid>http://blog.ednchina.com/xxmlyt/785958/message.aspx</guid><category></category><author>xxmlyt</author></item><item><title>小鲍子回来了</title><pubDate>Mon, 15 Mar 2010 16:08:53 GMT</pubDate><link>http://blog.ednchina.com/bobzone/779642/message.aspx</link><description>好久没来了，没来的这段时间主要是上课，跟师兄后面做嵌入式软件，然后陆续的出差。现在刚接了一个网络摄像头的新项目，搜资料一不小心搜到这里，突然想回来了。接下来的日子，与EDN一起进步</description><comments></comments><guid>http://blog.ednchina.com/bobzone/779642/message.aspx</guid><category></category><author>bobzone</author></item><item><title>来看看吧，保证不虚此行！</title><pubDate>Mon, 15 Mar 2010 06:36:23 GMT</pubDate><link>http://blog.ednchina.com/xxmlyt/773651/message.aspx</link><description>个案1： 广州海珠广场李宁店20岁女营业员于十几天前去世，该女曾觉得身体不适，去医院就医，医生看完她的X光片后大惊，因为该女五脏六腑和皮肤下全都是细菌虫，肝脏被侵蚀的只剩下一点点，医生告诉她直接准备后事了，经查致病原困是该女常年吃麻辣烫和米线，医生说这两种食品细菌严重超标，且佐料经过加工后也极易增长</description><comments></comments><guid>http://blog.ednchina.com/xxmlyt/773651/message.aspx</guid><category></category><author>xxmlyt</author></item><item><title>永远忠于年轻时的梦想</title><pubDate>Sun, 14 Mar 2010 14:47:29 GMT</pubDate><link>http://blog.ednchina.com/ilove314/766019/message.aspx</link><description>永远忠于年轻时的梦想 本来我也不知道最后的两课该以怎样的方式来讲，也不是很确定什么时候能够静下心来录。最近遇到了很多事，开心的不开心的，其实也无所谓开心和不开心，因为我的心情还是很平静的，不论是哪一方面。但是今天我算是闲下来了，我就决定要好好把最后两课录完，好给大家一个交代。 其实我是不太爱在EDN</description><comments></comments><guid>http://blog.ednchina.com/ilove314/766019/message.aspx</guid><category></category><author>ilove314</author></item><item><title>心得：使用PIC16f877实现can通信网络</title><pubDate>Thu, 11 Mar 2010 22:33:49 GMT</pubDate><link>http://blog.ednchina.com/sheafh/750292/message.aspx</link><description> 近期在做一个有关PIC16f877系列的单片机实现can总线的项目总结如下：1、在做电路板的时候，注意将晶振以及电容靠的放的越近越好，其他的器件也同样如此，相关的器件应该放的越近越好。2、PIC16f877无论是做电路板还是自己用面包板自己搭建，要注意RESET键上拉电阻再接VDD以及电源VDD处</description><comments></comments><guid>http://blog.ednchina.com/sheafh/750292/message.aspx</guid><category></category><author>sheafh</author></item></channel></rss>