<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>K2866的博客</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>20</ttl><pubDate>Sat, 17 May 2008 17:31:23 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>什么是爱</title><pubDate>Sat, 19 Jan 2008 11:19:30 GMT</pubDate><link>http://blog.ednchina.com/K2866/80686/message.aspx</link><description>有一天，女人问男人“你说，爱的最高境界是什么?” 男人想了想，说：“是生与死吧~! 　 你想啊~！一个人可以为另一个人去死 　 舍去生命中最重要的一切，还不是爱的最高境界吗？” 女人点了点头，又摇了摇头 　 开始时她也是这么认为的 　　 因为许多的爱情最壮烈的时候总是会和生与死联系在一起的 　 那些</description><comments></comments><guid>http://blog.ednchina.com/K2866/80686/message.aspx</guid><category></category><author>K2866</author></item><item><title>提高超声波测距精度方法的研究</title><pubDate>Sat, 19 Jan 2008 11:16:20 GMT</pubDate><link>http://blog.ednchina.com/K2866/80685/message.aspx</link><description>1 引 言 超声波测距作为一种典型的非接触测量方法，在很多场合，诸如工业自动控制，建筑工程测量和机器人视觉识别等方面得到广泛的应用。和其他方法相比，如激光测距、微波测距等，由于声波在空气中传播速度远远小于光线和无线电波的传播速度，对于时间测量精度的要求远小于激光测距、微波测距等系统，因而超声波测距系</description><comments></comments><guid>http://blog.ednchina.com/K2866/80685/message.aspx</guid><category></category><author>K2866</author></item><item><title>电容的特点及应用</title><pubDate>Sat, 19 Jan 2008 11:13:55 GMT</pubDate><link>http://blog.ednchina.com/K2866/80684/message.aspx</link><description>名称：聚酯（涤纶）电容（CL） 符号： 电容量：40p--4u 额定电压：63--630V 主要特点：体积小，容量大，耐热耐湿，稳定性差 应用：对稳定性和损耗要求不高的低频电路 名称：聚苯乙烯电容（CB） 符号： 电容量：10p--1u 额定电压：100V--30KV 主要特点：稳定，低损耗，体积较</description><comments></comments><guid>http://blog.ednchina.com/K2866/80684/message.aspx</guid><category></category><author>K2866</author></item><item><title>超声波雾化器</title><pubDate>Sat, 19 Jan 2008 11:09:09 GMT</pubDate><link>http://blog.ednchina.com/K2866/80679/message.aspx</link><description>本文介绍的装置能使盆景的假山、树木周围产生层层雾气，犹如山间飘着朵朵白云，极大地提高了观赏价值。同时也适合过分干燥的环境对空气加湿，以利人的呼吸；在水中加入适量的某种溶剂，给被污染的居住环境消毒，以预防疾病(如把生活用醋定时雾化，可预防流感)等等。 工作原理 　　电路如附图所示。 　　主要由超声波发</description><comments></comments><guid>http://blog.ednchina.com/K2866/80679/message.aspx</guid><category></category><author>K2866</author></item><item><title>自适应稳压电源</title><pubDate>Sat, 15 Dec 2007 11:05:55 GMT</pubDate><link>http://blog.ednchina.com/K2866/69088/message.aspx</link><description>自适应可调稳压电源coldfly 发表于 七月 29th, 2007电路与接口 这里介绍的可调稳压电源可以实现从1.25V~30V连续可调，输出电流可到4A左右。她采用最常见的可调试稳压集成电路W317组成电路的核心，关于她的详细指标参数可参阅这里。下面简单介绍一下该电路的特点。  本电路中，由T2</description><comments></comments><guid>http://blog.ednchina.com/K2866/69088/message.aspx</guid><category></category><author>K2866</author></item><item><title>传感器的发展方向</title><pubDate>Tue, 11 Sep 2007 17:01:10 GMT</pubDate><link>http://blog.ednchina.com/K2866/46177/message.aspx</link><description>传感器的发展方向1、向高精度发展： 随着自动化生产程度的不断提高，对传感器的要求也在不断提高，必须研制出具有灵敏度高、精确度高、响应速度快、互换性好的新型传感器以确保生产自动化的可靠性。目前能生产万分之一以上的传感器的厂家为数很少，其产量也远远不能满足要求。2、向高可靠性、宽温度范围发展： 传感器的</description><comments></comments><guid>http://blog.ednchina.com/K2866/46177/message.aspx</guid><category></category><author>K2866</author></item><item><title>用PWM实现DAC</title><pubDate>Sat, 11 Aug 2007 13:47:50 GMT</pubDate><link>http://blog.ednchina.com/K2866/40743/message.aspx</link><description>在电子和自动化技术的应用中，单片机和DAC (数模转换器)是经常需要同时使用的，然而许多单片机内部并没有集成DAC,即使有些单片机内部集成了DAC,DAC的精度也往往不高，在高 精度的应用中还是需要外接DAC，这样增加了成本。但是，几乎所有的单片机都提供定时器或者PWM输出功能。如果能应用单片机的P</description><comments></comments><guid>http://blog.ednchina.com/K2866/40743/message.aspx</guid><category></category><author>K2866</author></item><item><title>越野房车</title><pubDate>Sat, 11 Aug 2007 13:38:36 GMT</pubDate><link>http://blog.ednchina.com/K2866/40737/message.aspx</link><description></description><comments></comments><guid>http://blog.ednchina.com/K2866/40737/message.aspx</guid><category></category><author>K2866</author></item><item><title>控制</title><pubDate>Sat, 11 Aug 2007 13:32:30 GMT</pubDate><link>http://blog.ednchina.com/K2866/40736/message.aspx</link><description>目前工业自动化水平已成为衡量各行各业现代化水平的一个重要标志。同时，控制理论的发展也经历了古典控制理论、现代控制理论和智能控制理论三个阶段。智能控制的典型实例是模糊全自动洗衣机等。自动控制系统可分为开环控制系统和闭环控制系统。一个控制系统包括控制器、传感器、变送器、执行机构、输入输出接口。控制器的输</description><comments></comments><guid>http://blog.ednchina.com/K2866/40736/message.aspx</guid><category></category><author>K2866</author></item><item><title>PCB设置中元件摆放方法</title><pubDate>Thu, 09 Aug 2007 21:05:22 GMT</pubDate><link>http://blog.ednchina.com/K2866/40338/message.aspx</link><description>PCB设置中元件摆放方法一块合理的PCB板设计,除了提供优质的电气特性外,还要以下几个方面需要注意的,如何通过合理的布置,使这一块PCB板外形美观,安装方便,受力均匀,扰干扰能力好呢,就要做到以下几个方面了  元件布置合理是设计出优质的PCB图的基本前提。关于元件布置的要求主要有安装、受力、受热、信</description><comments></comments><guid>http://blog.ednchina.com/K2866/40338/message.aspx</guid><category></category><author>K2866</author></item><item><title>PCB设置中元件摆放方法</title><pubDate>Thu, 09 Aug 2007 21:05:20 GMT</pubDate><link>http://blog.ednchina.com/K2866/40337/message.aspx</link><description>PCB设置中元件摆放方法一块合理的PCB板设计,除了提供优质的电气特性外,还要以下几个方面需要注意的,如何通过合理的布置,使这一块PCB板外形美观,安装方便,受力均匀,扰干扰能力好呢,就要做到以下几个方面了  元件布置合理是设计出优质的PCB图的基本前提。关于元件布置的要求主要有安装、受力、受热、信</description><comments></comments><guid>http://blog.ednchina.com/K2866/40337/message.aspx</guid><category></category><author>K2866</author></item><item><title>AT89S51温控系统设计</title><pubDate>Mon, 06 Aug 2007 09:03:01 GMT</pubDate><link>http://blog.ednchina.com/K2866/39540/message.aspx</link><description> 转载单片机最小系统部分： ADC0809的A/D采样部分：四位LED数码管显示部分：  单片机串口通信电路：   温度采集部分：报警电路： 温控模拟部分(没有加热和冷却设备，只好模拟，达到实验目的就行)：  以下是程序：;显示区地址分别为６３Ｈ，６２Ｈ，６１Ｈ，６０Ｈ;上限温度地址分别为２ＥＨ，２</description><comments></comments><guid>http://blog.ednchina.com/K2866/39540/message.aspx</guid><category></category><author>K2866</author></item><item><title>多重触控屏</title><pubDate>Sat, 04 Aug 2007 12:15:55 GMT</pubDate><link>http://blog.ednchina.com/K2866/39351/message.aspx</link><description>苹果的iPhone手机，微软的Surface电脑，这两样东西现在都很火。两样东西拥有一个共同的器件——多重触摸屏，或者叫“多点触摸屏”，苹果叫它“Multi-Touch”。那么，Multi-Touch是怎样实现的呢？MS Surface computer多重触控屏与单点触摸屏的结构是不同的。从屏幕的</description><comments></comments><guid>http://blog.ednchina.com/K2866/39351/message.aspx</guid><category></category><author>K2866</author></item><item><title>电容按键</title><pubDate>Sat, 04 Aug 2007 11:25:31 GMT</pubDate><link>http://blog.ednchina.com/K2866/39347/message.aspx</link><description></description><comments></comments><guid>http://blog.ednchina.com/K2866/39347/message.aspx</guid><category></category><author>K2866</author></item><item><title>国外房车汇集</title><pubDate>Sat, 04 Aug 2007 10:47:39 GMT</pubDate><link>http://blog.ednchina.com/K2866/39338/message.aspx</link><description></description><comments></comments><guid>http://blog.ednchina.com/K2866/39338/message.aspx</guid><category></category><author>K2866</author></item><item><title>基于LM35温度传感器的温控系统设计</title><pubDate>Sat, 04 Aug 2007 10:39:10 GMT</pubDate><link>http://blog.ednchina.com/K2866/39336/message.aspx</link><description>基于LM35温度传感器的温控系统设计摘要：本文介绍了一种应用LM35温度传感器开发的温控系统，重点阐述了系统结构、工作原理以及采样值量化。同时对LM35传感器特性、系统硬件电路设计、软件设计也作了介绍。该系统体积小、成本低、工作可靠，具有很高工程应用价值。系统稍加改动或扩展，还可以完成温度测量等功能</description><comments></comments><guid>http://blog.ednchina.com/K2866/39336/message.aspx</guid><category></category><author>K2866</author></item><item><title>晶体管阵列电路</title><pubDate>Sat, 21 Jul 2007 09:23:10 GMT</pubDate><link>http://blog.ednchina.com/K2866/37049/message.aspx</link><description>ULN2000、ULN2800是高压大电流达林顿晶体管阵列系列产品,具有电流增益高、工作电压高、温度范围宽、带负载能力强等特点,适应于各类要求高速大功率驱动的系统。ULN2003A电路是美国Texas Instruments公司和Sprague公司开发的高压大电流达林顿晶体管阵列电路,文中介绍了它的</description><comments></comments><guid>http://blog.ednchina.com/K2866/37049/message.aspx</guid><category></category><author>K2866</author></item><item><title>自适应可调稳压</title><pubDate>Mon, 16 Jul 2007 15:00:32 GMT</pubDate><link>http://blog.ednchina.com/K2866/36322/message.aspx</link><description>   LM358内部包括有两个独立的、高增益、内部频率补偿的双运算放大器，适合于电源电压范围很宽的单电源使用，也适用于双电源工作模式，在推荐的工作条件下，电源电流与电源电压无关。它的使用范围包括传感放大器、直流增益模块和其他所有可用单电源供电的使用运算放大器的场合。 LM358的封装形式有塑封8引线</description><comments></comments><guid>http://blog.ednchina.com/K2866/36322/message.aspx</guid><category></category><author>K2866</author></item><item><title>用SG3525设计车载电源</title><pubDate>Mon, 16 Jul 2007 14:51:32 GMT</pubDate><link>http://blog.ednchina.com/K2866/36321/message.aspx</link><description>  随着社会的发展，汽车越来越与人们的生活息息相关，而汽车用的直流电压一般为12V，不能为便携式电子设备直接使用。为此，车载电源(就是把直流12 V电压转换成交流220 V／50 Hz电源)的研制日益引起人们的重视。 传统车载电源一般采用逆变器加工频变压器的方案，它存在体积大、效率低等缺陷。随着新型</description><comments></comments><guid>http://blog.ednchina.com/K2866/36321/message.aspx</guid><category></category><author>K2866</author></item><item><title>TL431及PC817在开关电源中的应用</title><pubDate>Mon, 16 Jul 2007 14:49:32 GMT</pubDate><link>http://blog.ednchina.com/K2866/36319/message.aspx</link><description>电流检测电路设计 本设计的基准电压和反馈电路采用常用的三端稳压器TL431来完成，在反馈电路的应用中运用采样电压通过TL431限压，再通过光电耦合器PC817把电压反馈到SG3525的COMP端。 由于TL431具有体积小、基准电压精密可调，输出电流大等优点，所以用TL431可以制作多种稳压器。其性</description><comments></comments><guid>http://blog.ednchina.com/K2866/36319/message.aspx</guid><category></category><author>K2866</author></item></channel></rss>