<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>YW912的博客</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>15</ttl><pubDate>Sat, 11 Oct 2008 12:20:59 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>红外探测器的原理</title><pubDate>Tue, 02 Sep 2008 10:04:02 GMT</pubDate><link>http://blog.ednchina.com/YW912/154958/message.aspx</link><description>被动红外探测器凡是温度超过绝对0℃的物体都能产生热辐射，而温度低于1725℃的物体产生的热辐射光谱集中在红外光区域，因此自然界的所有物体都能向外辐射红外热。而任何物体由于本身的物理和化学性质的不同、本身温度不同所产生的红外辐射的波长和距离也不尽相同，通常分为三个波段。 近红外：波长范围0.75～3μ</description><comments></comments><guid>http://blog.ednchina.com/YW912/154958/message.aspx</guid><category></category><author>YW912</author></item><item><title>Keil C51程序设计中几种精确延时方法</title><pubDate>Mon, 04 Aug 2008 20:13:21 GMT</pubDate><link>http://blog.ednchina.com/YW912/143161/message.aspx</link><description>单片机因具有体积小、功能强、成本低以及便于实现分布式控制而有非常广泛的应用领域[1]。单片机开发者在编制各种应用程序时经常会遇到实现精确延时的问题，比如按键去抖、数据传输等操作都要在程序中插入一段或几段延时，时间从几十微秒到几秒。有时还要求有很高的精度，如使用单总线芯片DS18B20时，允许误差范围</description><comments></comments><guid>http://blog.ednchina.com/YW912/143161/message.aspx</guid><category></category><author>YW912</author></item><item><title>用SST89E516RD自制51单片机仿真器</title><pubDate>Tue, 22 Jul 2008 17:36:15 GMT</pubDate><link>http://blog.ednchina.com/YW912/137439/message.aspx</link><description>单片机实验和开发中最重要的一个环节就是程序的调试，在业余条件下大部分人都采用烧写芯片直接到目标板上试验的方法，但是这样做在程序出现问题时比较麻烦，有时候也很难找到程序的问题出在那里。另外也可以采用软件仿真的方式调试程序，但是这种方式也有局限性，软件仿真有时候并不能完全代替实际使用环境。因此单片机仿真</description><comments></comments><guid>http://blog.ednchina.com/YW912/137439/message.aspx</guid><category></category><author>YW912</author></item><item><title>程序DEBUG的两条原则</title><pubDate>Mon, 14 Jul 2008 16:27:36 GMT</pubDate><link>http://blog.ednchina.com/YW912/134299/message.aspx</link><description>一个项目的程序可以分成3个部分完成.规划程序结构--写代码--调试程序.第一步和第三部是最困难的.总结我做的项目.在调试程序过程中有两条原则:1、每一个问题都有它存在的原因 对于测试出的问题一定要找出原因，不要抱侥幸心理。2、每个问题都有它解决的办法</description><comments></comments><guid>http://blog.ednchina.com/YW912/134299/message.aspx</guid><category></category><author>YW912</author></item><item><title>atmel89系列单片机命名方式</title><pubDate>Mon, 07 Jul 2008 11:49:10 GMT</pubDate><link>http://blog.ednchina.com/YW912/132134/message.aspx</link><description>89系列单片机一共有7种型号，分别为AT89C51，AT89LV51，AT89C52，AT89LV52，AT89C2051，AT89C1051，AT89S8252。其中AT89LV51和AT89LV52分别是AT89C51和AT89C52的低电压产品，最低电压可以低至2.7V。而AT89C1051和</description><comments></comments><guid>http://blog.ednchina.com/YW912/132134/message.aspx</guid><category></category><author>YW912</author></item><item><title>又要辞职了</title><pubDate>Mon, 23 Jun 2008 17:55:34 GMT</pubDate><link>http://blog.ednchina.com/YW912/127581/message.aspx</link><description>公司马上要搬到关外.我也不得不准备辞职.以前说过这是自己最后的一份工作.要塌实做,争取做出成绩,也好给自己的打工生涯增加一抹亮色.但是现在不得不考虑离开这里. 公司的管理混乱,产品前期的规划不清晰,导致开发出来后,一直打不开市场.一年来一直处于亏损状态.工资也很低,目前的状态应该舍的花高工资招有经验</description><comments></comments><guid>http://blog.ednchina.com/YW912/127581/message.aspx</guid><category></category><author>YW912</author></item><item><title>一个电子工程师的经验之谈3</title><pubDate>Thu, 05 Jun 2008 14:14:22 GMT</pubDate><link>http://blog.ednchina.com/YW912/123030/message.aspx</link><description>培养自己的学习方法也是工程师的必修课。知识爆炸的年代里，仅仅靠学校里学来的一点皮毛想成为优秀的工程师是不可能的，90%的知识都要靠自己去学习。很多学校刚毕业的学生并不会自学。拿过一本书来一阵看，看不懂就咬牙看下去，最后仍在一边。其实自学是非常讲究技巧和方法的。当然每个人都有自己的一套好办法。我通常把</description><comments></comments><guid>http://blog.ednchina.com/YW912/123030/message.aspx</guid><category></category><author>YW912</author></item><item><title>一个电子工程师的经验之谈2</title><pubDate>Thu, 05 Jun 2008 14:13:49 GMT</pubDate><link>http://blog.ednchina.com/YW912/123029/message.aspx</link><description>每个人的思维着眼点和注意的方面都不相同，很多人从小就会将注意放在自然科学之上，这些孩子中有很多就是未来的工程师。比如一个10岁的小学生看到一幢大楼，他会马上考虑大楼是如何建造的，塔吊又是怎么一节一节接起来的，那么高的大楼外墙的玻璃是如何安装的。另一个孩子会想工程师真伟大，还会想到一些诗句来抒发内心的</description><comments></comments><guid>http://blog.ednchina.com/YW912/123029/message.aspx</guid><category></category><author>YW912</author></item><item><title>一个电子工程师的经验之谈1</title><pubDate>Fri, 30 May 2008 08:59:10 GMT</pubDate><link>http://blog.ednchina.com/YW912/120085/message.aspx</link><description>“工程师是科学家；工程师是艺术家；工程师也是思想家。”一位伟大的工程师曾经提出过这样的一段感言。不错，工程师是利用自然科学来创造工程的人。工程既是物质的也是思想上的。许多不朽的工程，伟大的发明以及出神入化的技术方案，许多人往往只看到了他们的瑰丽，而作为工程师则更应该看到设计的灵魂。因此我们应该深入的</description><comments></comments><guid>http://blog.ednchina.com/YW912/120085/message.aspx</guid><category></category><author>YW912</author></item><item><title>悼念汶川地震死难同胞</title><pubDate>Mon, 19 May 2008 16:51:44 GMT</pubDate><link>http://blog.ednchina.com/YW912/116799/message.aspx</link><description>今天是哀悼日。为了死去的人，活着的人要好好的活着。</description><comments></comments><guid>http://blog.ednchina.com/YW912/116799/message.aspx</guid><category></category><author>YW912</author></item><item><title>完全免费的兼职信息网站</title><pubDate>Mon, 12 May 2008 17:22:23 GMT</pubDate><link>http://blog.ednchina.com/YW912/114907/message.aspx</link><description> 明明是到了绝处 仍信出生天 明明是心中爱恋 但到底未如愿 用决心走出昨天 像箭飞冲天 若老天降以重担 全力去担肩 不灰心 不放弃 信愿望始终会出现 多艰辛 多苦楚 也看作 是命运给予考验 登高峰 兴家邦 以勇气 用毅力 兴建宫殿 担得起 当得起 这重担 尽放双肩 期待这天 ——《朱蒙》亚洲电视版主</description><comments></comments><guid>http://blog.ednchina.com/YW912/114907/message.aspx</guid><category></category><author>YW912</author></item><item><title>KEIL中如何用虚拟串口调试串口程序</title><pubDate>Wed, 07 May 2008 15:30:22 GMT</pubDate><link>http://blog.ednchina.com/YW912/113477/message.aspx</link><description>以前没接触过串口，一直都以为串口很复杂。最近在做一个新项目，用单片机控制GSM模块。单片机和GSM模块接口就是串口。调试完后觉得串口其实很简单。“不过如此”。这可能是工程师做完一个项目后的共同心态吧。下面详细介绍下如何用虚拟串口调试串口发送接收程序。需要用到三个软件：KEIL，VSPD XP5（vi</description><comments></comments><guid>http://blog.ednchina.com/YW912/113477/message.aspx</guid><category></category><author>YW912</author></item><item><title>无题</title><pubDate>Tue, 29 Apr 2008 17:38:06 GMT</pubDate><link>http://blog.ednchina.com/YW912/110725/message.aspx</link><description> 远行的人，坐下来喝杯热茶 　　　　　　　　　　　　 　　喝杯热茶吧，前面还有很多路啊。 　　你看到的，翻过这坐山不是很容易的事情。 　　这要看你的毅力。还有这杯茶。 　　别站啊，靠在我的身旁。你看花漂亮吗。你不知道吗。你的眼睛。 　　乌鸦都走了。 　　孩子们睡熟了，他们总是那样甜美。我的心总是想哭</description><comments></comments><guid>http://blog.ednchina.com/YW912/110725/message.aspx</guid><category></category><author>YW912</author></item><item><title>USB转串口驱动程序</title><pubDate>Mon, 28 Apr 2008 16:51:00 GMT</pubDate><link>http://blog.ednchina.com/YW912/110251/message.aspx</link><description>现在很多电脑主板不带串口接口，扩展串口最方便的办法就是买USB转串口线。市面上这种产品便宜的一般15元左右，好点的在50元左右。强烈建议不要买便宜货，大部分都不能用。我买的是Z-TEK（力特）USB2.0转串口线。觉得还不错，推荐一下。</description><comments></comments><guid>http://blog.ednchina.com/YW912/110251/message.aspx</guid><category></category><author>YW912</author></item><item><title>转眼毕业7年</title><pubDate>Tue, 22 Apr 2008 19:15:54 GMT</pubDate><link>http://blog.ednchina.com/YW912/108368/message.aspx</link><description>01年7月13,北京申奥成功,第二天找到了第一份工作,做单片机开发.转眼08年,奥运就要开始了.期间已经记不清换了多少工作.从开发到销售再到开发.现在发现自己仍是刚入门而已.从现在开始在这里记录下学习的心得体会,记录下自己在深圳最后几年的工作.</description><comments></comments><guid>http://blog.ednchina.com/YW912/108368/message.aspx</guid><category></category><author>YW912</author></item></channel></rss>