<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>订阅接口电路的Rss信息 -- EDN电子设计技术</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>20</ttl><pubDate>Sat, 17 May 2008 10:13:54 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>自制USB声卡</title><pubDate>Fri, 16 May 2008 20:21:35 GMT</pubDate><link>http://blog.ednchina.com/zhouting/</link><description>声卡也可以自己制作吗?是的，完全可以!本文介绍一款采用USB接口的声卡，效果相当不错，电路也很简单。 电路原理 电路原理图如图1所示。 PCM2702(IC1)为美国TI公司属下的BB公司生产的USB接口DAC芯片。PCM27O2支持USB1.0标准，可接收16bit的立体声或单声道的USB音频数据</description><comments></comments><guid>http://blog.ednchina.com/zhouting/</guid><category></category><author>zhouting</author></item><item><title>74、74HC、74LS系列芯片资料</title><pubDate>Thu, 15 May 2008 00:00:00 GMT</pubDate><link>http://blog.ednchina.com/channlv/</link><description>74、74HC、74LS系列芯片资料，从网上下的，集合了一下 系列 电平 典型传输延迟ns 最大驱动电流(-Ioh/Lol)mA AHC CMOS 8.5 -8/8 AHCT COMS/TTL 8.5 -8/8 HC COMS 25 -8/8 HCT COMS/TTL 25 -8/8 ACT COM</description><comments></comments><guid>http://blog.ednchina.com/channlv/</guid><category></category><author>channlv</author></item><item><title>74系列芯片功能大全</title><pubDate>Wed, 14 May 2008 23:59:05 GMT</pubDate><link>http://blog.ednchina.com/channlv/</link><description>7400 TTL 2输入端四与非门 7401 TTL 集电极开路2输入端四与非门 7402 TTL 2输入端四或非门 7403 TTL 集电极开路2输入端四与非门 7404 TTL 六反相器 7405 TTL 集电极开路六反相器 7406 TTL 集电极开路六反相高压驱动器 7407 TTL 集电极</description><comments></comments><guid>http://blog.ednchina.com/channlv/</guid><category></category><author>channlv</author></item><item><title>ADI磁耦产品系列简介</title><pubDate>Wed, 14 May 2008 18:06:51 GMT</pubDate><link>http://blog.ednchina.com/jerrymiao/</link><description>ADI磁耦产品系列简介一、背景在各种各样的设计系统中，设计人员在防止电流在两点之间进行数据传输时的流通方面面临着很大的挑战，这是在做安全接地考虑方面最具代表性的问题，解决这个问题的方法就是使用一种允许两点之间信号的传递但能防止电流传输的电气隔离设备。我们常用的隔离设备是光电隔离器，这是一种通过光电转</description><comments></comments><guid>http://blog.ednchina.com/jerrymiao/</guid><category></category><author>jerrymiao</author></item><item><title>USB转串口（CH340）原理图及PCB</title><pubDate>Tue, 13 May 2008 23:30:47 GMT</pubDate><link>http://blog.ednchina.com/lzhshscut/</link><description>（CH340）原理图及PCBCH340，CH341,CH375中文资料有兴趣的下啊！共同分享！</description><comments></comments><guid>http://blog.ednchina.com/lzhshscut/</guid><category></category><author>lzhshscut</author></item><item><title>让我握住你的手——计算机接口基础知识（2）</title><pubDate>Tue, 13 May 2008 11:11:01 GMT</pubDate><link>http://blog.ednchina.com/avan/</link><description>上次谈到，握手信号是联系主机与外设的纽带，主机通过握手信号获得外设必要信息，为数据传输做好准备。那么，握手信号是不是在所有的计算机接口中都是必须的呢？回答是否定的。在鼠标和键盘使用PS/2接口中，就没有握手信号。键盘和鼠标也需要跟主机之间进行数据传输，没有握手信号，这些设备又是怎样与主机建立联系的呢</description><comments></comments><guid>http://blog.ednchina.com/avan/</guid><category></category><author>avan</author></item><item><title>关于隔离</title><pubDate>Mon, 12 May 2008 17:30:49 GMT</pubDate><link>http://blog.ednchina.com/jerrymiao/</link><description>关于隔离 一、什么是隔离？为什么要隔离？以及隔离会用在什么场合？隔离电路的主要原因是保护电路不受危险电压和电流的损坏，进行隔离是防止电流在两通讯之间流动的一种方法，一般在两种情况下会采用隔离技术：第一种情况是：在有可能存在损坏设备或危害人员的潜在电流浪涌时。如医疗上的应用、电机控制、总线隔离等方面。</description><comments></comments><guid>http://blog.ednchina.com/jerrymiao/</guid><category></category><author>jerrymiao</author></item><item><title>TTL电平与CMOS电平的区别</title><pubDate>Mon, 12 May 2008 16:54:09 GMT</pubDate><link>http://blog.ednchina.com/channlv/</link><description>TTL——Transistor-Transistor Logic HTTL——High-speed TTL LTTL——Low-power TTL STTL——Schottky TTL LSTTL——Low-power Schottky TTL ASTTL——Advanced Schottky TT</description><comments></comments><guid>http://blog.ednchina.com/channlv/</guid><category></category><author>channlv</author></item><item><title>继电器线圈的驱动</title><pubDate>Fri, 09 May 2008 16:53:38 GMT</pubDate><link>http://blog.ednchina.com/WoodPecker/</link><description>关于继电器： 交流线圈的铁芯中有短路环，保证电流过零而磁路不过零，直流线圈的铁芯中没有。 交流线圈可以长时间通电，直流线圈则要看具体型号的说明书。 交流线圈的阻抗小，如果用直流驱动，要串联电阻。 MAX4822/4824用于驱动继电器，具有省电模式。 如果需要一个线圈长时间通电，可以用PWM驱动。线</description><comments></comments><guid>http://blog.ednchina.com/WoodPecker/</guid><category></category><author>WoodPecker</author></item><item><title>D12的USB C51驱动程序开发</title><pubDate>Tue, 06 May 2008 22:48:07 GMT</pubDate><link>http://blog.ednchina.com/ts6969/</link><description>浅入深开展应用D12的USB C51驱动程序开发USB设备启动流程： 1.USB设备接入USB口，发出连接USB命令 2.主机发出读设备描述符两次。 3.主机根据设备描述符——厂商ID、产品ID，启动相应设备驱动程序。 4.设备驱动程序初始化USB设备： 　　a.读设备描述符 　　b.读配置描述符 </description><comments></comments><guid>http://blog.ednchina.com/ts6969/</guid><category></category><author>ts6969</author></item><item><title>光线照度指示器电路</title><pubDate>Tue, 06 May 2008 19:41:40 GMT</pubDate><link>http://blog.ednchina.com/alex1120/</link><description> 本例介绍的光线照度指示器，采用LED发光二极管来指示环境光线的强弱等级，可作为摄影爱好者的测光表。电路工作原理 该光线照度指示器电路由光线检测电路和LED驱动电路组成，如图所示。电路中，光线检测电路由光敏二极管VLS、晶体管V1、V2、电位器RP和电阻器R1组成；LED驱动电路由晶体管V3 ~V6</description><comments></comments><guid>http://blog.ednchina.com/alex1120/</guid><category></category><author>alex1120</author></item><item><title>USB接口的基础理论知识（转帖）</title><pubDate>Tue, 06 May 2008 09:29:12 GMT</pubDate><link>http://blog.ednchina.com/ts6969/</link><description> USB接口的基础理论知识  USB的重要关键字: 1、端点：位于USB设备或主机上的一个数据缓冲区，用来存放和发送USB的各种数据，每一个端点都有惟一的确定地址，有不同的传输特性（如输入端点、输出端点、配置端点、批量传输端点） 2、帧：时间概念，在USB中，一帧就是1MS，它是一个独立的单元，包含</description><comments></comments><guid>http://blog.ednchina.com/ts6969/</guid><category></category><author>ts6969</author></item><item><title>USB传输的基本单元---包（转帖）</title><pubDate>Tue, 06 May 2008 09:26:35 GMT</pubDate><link>http://blog.ednchina.com/ts6969/</link><description>USB传输的基本单元---包  1推荐包（Packet）是USB系统中信息传输的基本单元，所有的数据都是经过打包后在总线上传输的。USB系统采用反向不归零（NRZI）编码方式，采用位填充方式（Bit-Stuff）避免同步漂移。 1 包的组成 USB包由5部分组成，即同步字段（Synchronizat</description><comments></comments><guid>http://blog.ednchina.com/ts6969/</guid><category></category><author>ts6969</author></item><item><title>瞬态电压抑制二极管</title><pubDate>Tue, 06 May 2008 00:20:33 GMT</pubDate><link>http://blog.ednchina.com/thinkker/</link><description> 瞬态电压抑制二极管Transient Voltage Suppressors（TVS） 概述 电压及电流的瞬态干扰是造成电子电路及设备损坏的主要原因，常给人们带来无法估量的损失。这些干扰通常来自于电力设备的起停操作、交流电网的不稳定、雷击干扰及静电放电等,瞬态干扰几乎无处不在、无时不有,使人感到防</description><comments></comments><guid>http://blog.ednchina.com/thinkker/</guid><category></category><author>thinkker</author></item><item><title>USBD12常见问题解答</title><pubDate>Sat, 03 May 2008 14:52:05 GMT</pubDate><link>http://blog.ednchina.com/icefier/</link><description>USBD12常见问题解答</description><comments></comments><guid>http://blog.ednchina.com/icefier/</guid><category></category><author>icefier</author></item><item><title>USBD12固件编程指南</title><pubDate>Sat, 03 May 2008 14:51:00 GMT</pubDate><link>http://blog.ednchina.com/icefier/</link><description>USBD12固件编程指南</description><comments></comments><guid>http://blog.ednchina.com/icefier/</guid><category></category><author>icefier</author></item><item><title>USBD12的中文简要介绍</title><pubDate>Sat, 03 May 2008 14:49:26 GMT</pubDate><link>http://blog.ednchina.com/icefier/</link><description>今天才焊好板子，然后找了点资料，大家喜欢的就支持下</description><comments></comments><guid>http://blog.ednchina.com/icefier/</guid><category></category><author>icefier</author></item><item><title>如何实现低成本，高精度，高稳定性的DA输出</title><pubDate>Fri, 02 May 2008 20:13:33 GMT</pubDate><link>http://blog.ednchina.com/huanan_/</link><description>在实际应用中，很多时候需要输出电压，电流等信号，特别是在工控行业中，4-20mA的转换经常要用到，如果采用AD421芯片来做的话，可以轻易实现一个16位的DA输出电路，但是成本颇高，在很多的项目中用不上如此昂贵的芯片。既然现在很多的仪表中都使用了单片机，为何不用单片机的PWM输出来做一个DA呢？实践</description><comments></comments><guid>http://blog.ednchina.com/huanan_/</guid><category></category><author>huanan_</author></item><item><title>ＰＴ２２６２／ＰＴ２２７２遥控编解码芯片资料</title><pubDate>Sun, 27 Apr 2008 22:18:03 GMT</pubDate><link>http://blog.ednchina.com/mysky/</link><description>PT2262/2272遥控编解码芯片资料转自ＯＵＲＡＶＲ　　　　PT2262/2272是台湾普城公司生产的一种CMOS工艺制造的低功耗低价位通用编解码电路，PT2262/2272最多可有12位(A0-A11)三态地址端管脚(悬空,接高电平,接低电平),任意组合可提供531441地址码,PT2262最</description><comments></comments><guid>http://blog.ednchina.com/mysky/</guid><category></category><author>mysky</author></item><item><title>TI 400mA微小型低功耗DC/DC转换器</title><pubDate>Sat, 26 Apr 2008 13:53:47 GMT</pubDate><link>http://blog.ednchina.com/liuweiping1122/</link><description>TI 400mA微小型低功耗DC/DC转换器技术分类： 电源技术 | 2008-03-28  　　日前，德州仪器 (TI) 宣布推出了一款针对便携式设计的节省空间的 400 mA 降压转换器。该转换器的电源效率高达 95%，从而能够显著延长各种应用中的电池使用寿命，其中包括移动电话、便携式导航系统、</description><comments></comments><guid>http://blog.ednchina.com/liuweiping1122/</guid><category></category><author>liuweiping1122</author></item></channel></rss>