标签： 无标签

_iic.c

/*
 *  Copyright 2003 by Texas Instruments Incorporated.
 *  All rights reserved. Property of Texas Instruments Incorporated.
 *  Restricted rights to use, duplicate or disclose this code are
 *  granted through contract.
 * 
 */
/* "@(#) DDK 1.10.00.23 07-02-03 (ddk-b12)" */
#include "_iic.h"     

#define I2CDELAY(iterations)  {      \
    volatile Int j;                  \
    for(j = 0; j < iterations; j ++); \
}  
#define DELAY_TIME 1000

static const I2C_Config EVM642VIDEOIIC_Config = {
    0,  /* master mode,  i2coar;   */
    0,  /* no interrupt, i2cimr;   */
    (20-5), /* scl low time, i2cclkl;  */
    (20-5), /* scl high time,i2cclkh;  */
    1,  /* configure later, i2ccnt;*/
    0,  /* configure later, i2csar;*/
    0x4620, /* master tx mode,     */
            /* i2c runs free,      */
            /* 8-bit data + NACK   */
            /* no repeat mode      */
    (75-1), /* 4MHz clock, i2cpsc  */
};

/*
 * ======== _IIC_write ========
 * This function performs write operation via I2C bus.
 */

void _IIC_write(I2C_Handle hI2C,
              Uint8 devAddress,
              Uint32  subAddress,
              Uint8 *data,
              Uint16  numBytes
              )
{            
    Int i;
    I2C_Config prevIICConfig;
   
    /* make sure handle is valid */
    if(hI2C == INV) {
        return;
    }
   
    /* Wait until bus is free */
    while (I2C_bb(hI2C));

    /* save old settings */
    I2C_getConfig(hI2C, &prevIICConfig);

    /* set I2C mode register */
    I2C_RSETH(hI2C, I2CMDR, EVM642VIDEOIIC_Config.i2cmdr);
   
    /* set I2C imr register  */
    I2C_RSETH(hI2C, I2CIMR, EVM642VIDEOIIC_Config.i2cimr);
   
    /* configure the I2C slave address register */
    I2C_RSETH(hI2C, I2CSAR, devAddress);
   
    /* set I2C count register */
    I2C_RSETH(hI2C, I2CCNT, numBytes + 1);
   
    /* write the sub address */
    I2C_RSETH(hI2C, I2CDXR, subAddress);
   
    /* Generate start condition */
    I2C_start(hI2C);
   
    I2CDELAY(DELAY_TIME);

    /* write the data */
    for(i = 0; i < numBytes; i ++) {
        while(!I2C_xrdy(hI2C));
        I2C_writeByte(hI2C, *data ++);
        I2CDELAY(DELAY_TIME);
    }

    /* Generate stop condition */
    I2C_sendStop(hI2C);
   
    I2CDELAY(DELAY_TIME);       
    /* Wait until bus is free */
    while (I2C_bb(hI2C));

    I2CDELAY(DELAY_TIME);       
    /* now restore the previous I2C settings */
   
    /* set I2C mode register */
    I2C_RSETH(hI2C, I2CMDR, prevIICConfig.i2cmdr);
   
    /* set I2C imr register  */
    I2C_RSETH(hI2C, I2CIMR, prevIICConfig.i2cimr);
   
    /* configure the I2C slave address register */
    I2C_RSETH(hI2C, I2CSAR, prevIICConfig.i2csar);
   
    /* set I2C count register */
    I2C_RSETH(hI2C, I2CCNT, prevIICConfig.i2ccnt);

    I2CDELAY(DELAY_TIME);       
}    

系统分类: DSP   |   用户分类: 无分类   |   来源: 无分类   |   【推荐给朋友】