<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>linux28的博客</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>20</ttl><pubDate>Mon, 13 Oct 2008 18:40:55 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>PCS &amp; ATPCS</title><pubDate>Mon, 01 Sep 2008 22:46:10 GMT</pubDate><link>http://blog.ednchina.com/linux28/154632/message.aspx</link><description>本文来自网络，稍作整理。什么是PCS，什么是ATPCS? PCS即Procedure Call Standard（过程调用规范），ATPCS即ARM-THUMB procedure call standard。 PCS规定了应用程序的函数可以如何分开地写，分开地编译，最后将它们连接在一起，所以它实际</description><comments></comments><guid>http://blog.ednchina.com/linux28/154632/message.aspx</guid><category></category><author>linux28</author></item><item><title>关于SEP4020</title><pubDate>Wed, 11 Jun 2008 18:20:32 GMT</pubDate><link>http://blog.ednchina.com/linux28/124351/message.aspx</link><description> 觉得这个芯片比S3C44B0强不少，而且比9200多一个液晶显示接口，定位还是不错的。东南大学做的，算是国产吧。当然，ARM720T的内核，只能买了。 不过，芯片的用户手册确实不怎么样，看得我云里雾里的，难道是因为我很久没有看芯片的用户手册了？不可能吧。想用它来做一个小东东，先试试所有的功能吧，再</description><comments></comments><guid>http://blog.ednchina.com/linux28/124351/message.aspx</guid><category></category><author>linux28</author></item><item><title>让Protel99SE有更多的布线屏幕空间</title><pubDate>Thu, 10 Apr 2008 16:45:39 GMT</pubDate><link>http://blog.ednchina.com/linux28/102821/message.aspx</link><description> 当使用Protel99 SE SP6设计电路板，且使用的是15寸液晶显示器时，让屏幕显示更多的布线面积就比较重要了。 我认为：Status Bar是不必要的，所以在布线时，可以将其去掉。快捷键组合的次序为：V→S。重复一下，Status Bar便可以重新显示出来。接下来是：V→M。即是左侧的项目管</description><comments></comments><guid>http://blog.ednchina.com/linux28/102821/message.aspx</guid><category></category><author>linux28</author></item><item><title>C51与水仙花数</title><pubDate>Tue, 25 Mar 2008 15:59:43 GMT</pubDate><link>http://blog.ednchina.com/linux28/97664/message.aspx</link><description> 昨天晚上看到了一段关于求水仙花数的C语言程序，其实我就是想知道100～999里面有几个水仙花数，然而在电脑里面又没有TC的编译器，不过，手头上刚好有个51的板子，于是，俺就用keil编译一下那段例程，下载到51里面，然后通过串口打印回来。哈，如果我没有记错的话，有4个。153，370，371，，后</description><comments></comments><guid>http://blog.ednchina.com/linux28/97664/message.aspx</guid><category></category><author>linux28</author></item><item><title>两则引用</title><pubDate>Wed, 19 Dec 2007 13:55:51 GMT</pubDate><link>http://blog.ednchina.com/linux28/70331/message.aspx</link><description> 看来“原创”、“转贴”跟“整理”之间的区分还是比较清晰的。通篇都是别人写的，当然是转贴。引用超过篇幅70%以上的，看来只能算是整理了。 今天复习网络知识时，读到的一段话： 在80年代，网络不断增长的原因之一是大家都意识到只有一台孤立的计算机构成的“孤岛”没有太大意义，于是就把这些孤立的系统组在一起</description><comments></comments><guid>http://blog.ednchina.com/linux28/70331/message.aspx</guid><category></category><author>linux28</author></item><item><title>贴片三极管的封装排序</title><pubDate>Wed, 28 Nov 2007 23:56:40 GMT</pubDate><link>http://blog.ednchina.com/linux28/63047/message.aspx</link><description> 可能有一小部分工程师在初次使用三极管时，遇到过封装上的问题。原因在于原理图管脚排序跟实际器件之间的不对应。或者是原理图的管脚排序弄错了，或是器件的封装搞错了，也可能是两样都错了。不过，倘若是两样都错，没准负负得正，一焊上就是好的。然而，问题只是给掩盖着而已，如果不是心知肚明的话，早晚还得出问题。 </description><comments></comments><guid>http://blog.ednchina.com/linux28/63047/message.aspx</guid><category></category><author>linux28</author></item><item><title>重温美丽晚星</title><pubDate>Mon, 26 Nov 2007 22:25:43 GMT</pubDate><link>http://blog.ednchina.com/linux28/62462/message.aspx</link><description> 重温美丽晚星，回归恬静，绵绵旧情。 ——刘卓辉 上面的一句来自张学友所唱的《绵绵旧情》，刘卓辉作词，好像是日本人作的曲。懒得搜了。 今晚在家无事，居然翻出一本计算机等级考试教程来，叫《计算机系统组成及工作原理》，考四级用的。当年没有考，现在就更不用考了。不过既然翻了出来，不如再随便翻翻吧。虽然我用</description><comments></comments><guid>http://blog.ednchina.com/linux28/62462/message.aspx</guid><category></category><author>linux28</author></item><item><title>HotPower大叔看过来</title><pubDate>Sun, 11 Nov 2007 20:37:22 GMT</pubDate><link>http://blog.ednchina.com/linux28/58719/message.aspx</link><description> 下面是俺前几分钟的截图，本来要发在你帖子的回复里面，然而EDN拆哪似乎没有还没有支持那个高级回复的功能。当然，它提供了，然而，却没有实现。 # re:菜地公告:凡菜农答疑正确者借用选美证一次 2007-11-11 20:16:52 linux2.8 呵呵，圈圈是位好同学 # re:菜地公告:凡菜农</description><comments></comments><guid>http://blog.ednchina.com/linux28/58719/message.aspx</guid><category></category><author>linux28</author></item><item><title>板级功能建造时</title><pubDate>Sat, 10 Nov 2007 22:18:36 GMT</pubDate><link>http://blog.ednchina.com/linux28/58655/message.aspx</link><description> 中国长城止于中国的最北端。工程从东南和西南两头发端，伸展到这里相联结。这种分段修建 的办法在东西两支劳动大军的内部也以小的规模加以实行。方法是：二十来个民工为一小队，每队 担负修建约五百米长的一段，邻队则修建同样长度的一段与他们相接。但等到两段城墙接以后，并 不是接着这一千米的城的末端继续施工，而</description><comments></comments><guid>http://blog.ednchina.com/linux28/58655/message.aspx</guid><category></category><author>linux28</author></item><item><title>立冬，低电平</title><pubDate>Thu, 08 Nov 2007 12:44:41 GMT</pubDate><link>http://blog.ednchina.com/linux28/58026/message.aspx</link><description> 落叶舞回风，太阳当空照，又是一年立冬时。给浓雾浮尘包围了三四天之后，又看见蓝天，犹如飞线满板的板子突然实现了所需要的功能，一道亮光射出来，整个世界可爱多了。 这个世间，有许许多多的冬天。有恋人间默默无语的冬天，手与手不再相握，而是深深地放在衣服的兜里。有父子间背道而驰的冬天，那时，谁也说服不了对方</description><comments></comments><guid>http://blog.ednchina.com/linux28/58026/message.aspx</guid><category></category><author>linux28</author></item><item><title>音频运放小知识</title><pubDate>Tue, 06 Nov 2007 22:01:38 GMT</pubDate><link>http://blog.ednchina.com/linux28/57707/message.aspx</link><description> 俺在网上搜到的，是否为第一出处，俺就管不了了。准备玩点音频方面的东东，现在先准备准备，预热一下。顺便记住几个运放的型号，到时好去跟中发的商人们打听一下价格。货比三家后再出手。 音频运放小知识 http://www.eetop.cn/blog/?39721/action_viewspace_item</description><comments></comments><guid>http://blog.ednchina.com/linux28/57707/message.aspx</guid><category></category><author>linux28</author></item><item><title>使用数字电位器的一点经验</title><pubDate>Mon, 05 Nov 2007 20:05:22 GMT</pubDate><link>http://blog.ednchina.com/linux28/57411/message.aspx</link><description> 以前使用过型号为X9241的数字电位器，下面俺就来说说当时在使用过程中遇到的一些问题。 首先是电位器阻值的选择，接着就是抽头的数量。一般来说有32、64、128、256抽头的。可以这样来类比一下：256抽头的电位器就相当于8位精度的DAC。32抽头的当然就对应着5位精度的DAC（有5位精度的DAC</description><comments></comments><guid>http://blog.ednchina.com/linux28/57411/message.aspx</guid><category></category><author>linux28</author></item><item><title>真是让俺晕死</title><pubDate>Sun, 04 Nov 2007 13:00:58 GMT</pubDate><link>http://blog.ednchina.com/linux28/57225/message.aspx</link><description> 到底怎么回事，调整来调整去的，最后还是不好用。都不知道这个博客是怎样维护的，如果没有编辑参与的话，那程序就应该是自动识别啊。难道还有许多条件选项不成？如创建时间，积分，或者回帖的次数等？如果没有的话，就应该一视同仁嘛。然而，一视同仁的话，做广告的又该偷着乐了。 不管了，以后就用这个ID吧。很是让我</description><comments></comments><guid>http://blog.ednchina.com/linux28/57225/message.aspx</guid><category></category><author>linux28</author></item><item><title>使用液晶模块的两点经验</title><pubDate>Sun, 04 Nov 2007 12:50:55 GMT</pubDate><link>http://blog.ednchina.com/linux28/57224/message.aspx</link><description> 用过3款液晶之后，积累了点经验，故记下来供大家参考，也请大家多多指教。 一款是RT1602。这款液晶很便宜，20元以下，绿色背光。它是字符型的。里面有常用的字符，如英文字母、常用符号等。没有中文，而且它不是点阵型的，所以也不能做字库点阵。它的图片如下： 其它两款，在机子里没有图片。一款是HY122</description><comments></comments><guid>http://blog.ednchina.com/linux28/57224/message.aspx</guid><category></category><author>linux28</author></item><item><title>搬博客也麻烦</title><pubDate>Fri, 02 Nov 2007 23:50:58 GMT</pubDate><link>http://blog.ednchina.com/linux28/57000/message.aspx</link><description> 我以为搬家麻烦，没想到搬个博客也这么麻烦。幸亏才发了几篇帖子，不然修改起来更得费工夫。祥林嫂也曾感慨过：单以为冬天里狼没有食吃，会到村子里来，没想到春天它也会来。看来这狼一年到头都没有吃饱过，因为它尚未找到组织。</description><comments></comments><guid>http://blog.ednchina.com/linux28/57000/message.aspx</guid><category></category><author>linux28</author></item><item><title>关于flashpgm</title><pubDate>Fri, 02 Nov 2007 20:24:00 GMT</pubDate><link>http://blog.ednchina.com/linux28/56990/message.aspx</link><description> 使用这个软件来烧录arm板上的flash，是比较方便的，而且在开发前期，也是必需的。当然还有别的烧录软件。关于flashpgm，网上都有不少的帖子。我下面只说一下让我感到很郁闷的一个低级错误。我在一台IBM的笔记本上使用不了它，原因就是没有设置好LPT1的地址。在台式机上，BIOS里面一般会默认L</description><comments></comments><guid>http://blog.ednchina.com/linux28/56990/message.aspx</guid><category></category><author>linux28</author></item><item><title>Adobe Reader的更新</title><pubDate>Fri, 02 Nov 2007 15:34:57 GMT</pubDate><link>http://blog.ednchina.com/linux28/56991/message.aspx</link><description> 我现在用的是Adobe Reader 7.0.9，觉得功能已经很多了。这几天以来，它不断地跳出对话框，说有8.0出来了，问俺要不要更新。跳一次到也罢了。没想到，每天连接上网后，打开它时，就跳对话框。倘若我没有接网线，如果打开着Reader，天晓得它会怎么去工作，它会主动关掉自动更新这个功能吗？还是</description><comments></comments><guid>http://blog.ednchina.com/linux28/56991/message.aspx</guid><category></category><author>linux28</author></item><item><title>Protel 99SE也要初始化</title><pubDate>Fri, 02 Nov 2007 06:33:36 GMT</pubDate><link>http://blog.ednchina.com/linux28/56992/message.aspx</link><description> 如上图，去掉红圈里面的那个勾勾，就可以使用系统字体了，也就是说字体变小了。不然的话，效果如下图： 主要是看了 PROTEL小经验二则!!!这个帖子，发现里面居然是大字体，所以就弄了这个帖子上来说说，也算一点经验吧。我在那个帖子里面的回复也拷贝过来吧。  我用的是在Tenting上打勾，加工出来的就</description><comments></comments><guid>http://blog.ednchina.com/linux28/56992/message.aspx</guid><category></category><author>linux28</author></item><item><title>关于MiniCOM</title><pubDate>Fri, 02 Nov 2007 05:00:08 GMT</pubDate><link>http://blog.ednchina.com/linux28/56993/message.aspx</link><description> 昨天使用了RedHat9.0里面的MiniCOM，能收不能发，跟win系统里面的超级终端还是有区别。可能是那个参数我还没有设置好，不过到网上查了查，也没有帖子说minicom能够跟超级终端一样。有点郁闷。看了一下别人翻译的中文使用手册，好像也没有提到这个问题。今天再看看，不行的话再想别的办法。本来</description><comments></comments><guid>http://blog.ednchina.com/linux28/56993/message.aspx</guid><category></category><author>linux28</author></item><item><title>白去了趟蓟门桥</title><pubDate>Fri, 02 Nov 2007 01:54:37 GMT</pubDate><link>http://blog.ednchina.com/linux28/56994/message.aspx</link><description> 没承想蓟门饭店那一带都在拆迁，真是指哪拆哪(chi na)。前些天去了趟中发，以为MAXIM还在蓟门饭店那里，就直接过去了，唉，看来是落伍了。歌里都有得唱：我不申请样片很多年，我只爱到中发去捡破烂。所以浪费俺11元打车费。本想着拿MAXIM两个样片，也就心里平衡了。可惜啊……于是坐公交回家。</description><comments></comments><guid>http://blog.ednchina.com/linux28/56994/message.aspx</guid><category></category><author>linux28</author></item></channel></rss>