<?xml version="1.0" encoding="gb2312"?><rss version="2.0"><channel><title>xlfu的博客</title><link></link><description></description><language>zh-cn</language><generator>Goodspeed Rss</generator><ttl>20</ttl><pubDate>Mon, 08 Sep 2008 17:23:55 GMT</pubDate><category></category><copyright></copyright><docs></docs><item><title>接地技术的讨论(转载)</title><pubDate>Mon, 09 Apr 2007 19:30:57 GMT</pubDate><link>http://blog.ednchina.com/xlfu/21298/message.aspx</link><description>在论坛上模拟板块闲逛时，看到这篇文章，很有用，所以保存起来，自己慢慢消化，^_^Q1：为什么要接地? Answer：接地技术的引入最初是为了防止电力或电子等设备遭雷击而采取的保护性措施，目的是把雷电产生的雷击电流通过避雷针引入到大地，从而起到保护建筑物的作用。同时，接地也是保护人身安全的一种有效手段</description><comments></comments><guid>http://blog.ednchina.com/xlfu/21298/message.aspx</guid><category></category><author>xlfu</author></item><item><title>导线截面积与载流量的计算（转）</title><pubDate>Thu, 05 Apr 2007 19:37:29 GMT</pubDate><link>http://blog.ednchina.com/xlfu/20764/message.aspx</link><description>导线截面积与载流量的计算 一、一般铜导线载流量 导线的安全载流量是根据所允许的线芯最高温度、冷却条件、敷设条件来确定的。 一般铜导线的安全载流量为5~8A/mm2，铝导线的安全载流量为3~5A/mm2。 &amp;amp;lt;关键点&amp;amp;gt; 一般铜导线的安全载流量为5~8A/mm2，铝导线的安全载流量为3~5A/</description><comments></comments><guid>http://blog.ednchina.com/xlfu/20764/message.aspx</guid><category></category><author>xlfu</author></item><item><title>常用电工计算口诀(二)（转）</title><pubDate>Thu, 05 Apr 2007 19:02:56 GMT</pubDate><link>http://blog.ednchina.com/xlfu/20763/message.aspx</link><description>第二章 导体载流量的计算口诀  1、用途：各种导线的载流量(安全电流)通常可以从手册中查找。但利用口诀再配合一些简单的心算,便可直接算出,不必查表。导线的载流量与导线的载面有关,也与导线的材料(铝或铜),型号(绝缘线或裸线等),敷设方法(明敷或穿管等)以及环境温度(25度左右或更大)等有关,影响的因</description><comments></comments><guid>http://blog.ednchina.com/xlfu/20763/message.aspx</guid><category></category><author>xlfu</author></item><item><title>高速模拟数字转换器的LVDS资料输出(转载)</title><pubDate>Fri, 23 Mar 2007 14:03:59 GMT</pubDate><link>http://blog.ednchina.com/xlfu/18947/message.aspx</link><description>模拟数字转换器(ADC)的取样率正在逐年稳定的成长中，以便因应通信、测试仪器以及消费性等市场上大频宽新产品的需求。伴随着将信号链当中的信号预先数字化，以便应用在数字信号处理技术的这类需要出现，促使了高速模拟数字转换器核心的发展，朝向字转换时脉高于100MHz到200MHz，且解析度高达8到12位元的</description><comments></comments><guid>http://blog.ednchina.com/xlfu/18947/message.aspx</guid><category></category><author>xlfu</author></item><item><title>RGB色彩传感器工作原理及应用方案分析（转）</title><pubDate>Tue, 06 Mar 2007 14:41:18 GMT</pubDate><link>http://blog.ednchina.com/xlfu/17425/message.aspx</link><description>尽管人眼区分色彩的能力非常强，但不同的人在描述同一色彩时会有所不同，这意味着在要求精确的色彩检测和管理的应用中，口头描述是不够的。更好的解决方案是使用充分校准的色彩传感设备，以数字方式描述色彩。这些设备包括昂贵的实验室级分光光谱仪到经济的RGB色彩传感器(如安华高科技生产的色彩传感器)。安华高科技拥</description><comments></comments><guid>http://blog.ednchina.com/xlfu/17425/message.aspx</guid><category></category><author>xlfu</author></item><item><title>LAYOUT走线策略（转）</title><pubDate>Tue, 06 Mar 2007 14:39:15 GMT</pubDate><link>http://blog.ednchina.com/xlfu/17424/message.aspx</link><description>布线（Layout）是PCB设计工程师最基本的工作技能之一。走线的好坏将直接影响到整个系统的性能，大多数高速的设计理论也要最终经过Layout得以实现并验证，由此可见，布线在高速PCB设计中是至关重要的。下面将针对实际布线中可能遇到的一些情况，分析其合理性，并给出一些比较优化的走线策略。主要从直角走</description><comments></comments><guid>http://blog.ednchina.com/xlfu/17424/message.aspx</guid><category></category><author>xlfu</author></item><item><title>三极管安全使用注意事项（转载）</title><pubDate>Wed, 28 Feb 2007 20:14:12 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16941/message.aspx</link><description>以前在网上“三极管失效分析请教”等帖子，便想给网友总结一下关于三极管使用注意事项。 我记得以前大学期间学过的童诗白《模拟电路》讲得很好。写一篇关于三极管安全使用的文章友没有必要呢？是不是画蛇添足呢？ 三极管的主要参数为：Pc、IC、IB、hfe、Vce(sat)、fｒ、Ton/ Tf，这些参数大家都</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16941/message.aspx</guid><category></category><author>xlfu</author></item><item><title>接地技术讨论（转）</title><pubDate>Wed, 28 Feb 2007 19:34:47 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16938/message.aspx</link><description>。（EDN China技术论坛 http://www.ednchina.com/bbs/def.asp ） Q1：为什么要接地? Answer：接地技术的引入最初是为了防止电力或电子等设备遭雷击而采取的保护性措施，目的是把雷电产生的雷击电流通过避雷针引入到大地，从而起到保护建筑物的作用。同时，接地也</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16938/message.aspx</guid><category></category><author>xlfu</author></item><item><title>不错的电子设计网站</title><pubDate>Wed, 28 Feb 2007 19:21:12 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16936/message.aspx</link><description>http://bbs.chinaecnet.com/index.asphttp://www.avrw.com/bbs/index.asphttp://bbs.matwav.com/index.jsphttp://www.pcbbbs.com/http://www.fpga.com.cn/http:/</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16936/message.aspx</guid><category></category><author>xlfu</author></item><item><title>开发人员的几个常疏忽的问题点</title><pubDate>Wed, 28 Feb 2007 19:03:20 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16934/message.aspx</link><description>1、IC封装的选择。现在电子产品都在向环保的无铅发展，欧洲2006年7月1日 就要实现全部无铅化，，现在正处于有铅向无铅的过渡期。因此，元器件厂商提供 的元器件也出现无铅与有铅两种规格，有的厂商甚至已经停止了有铅元器件的生产 。 　　问题点就在于这有铅和无铅两种元器件的选择上，当一个产品设计完成后，</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16934/message.aspx</guid><category></category><author>xlfu</author></item><item><title>《大长今》的成功学</title><pubDate>Wed, 28 Feb 2007 18:44:31 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16932/message.aspx</link><description>一般人到了一个恶劣的环境中，大都首先会想着如何逃避，紧接着就是一有机会就哀声叹气地抱怨，但长今从不抱怨，再苦再可悲的事降临时，她会马上睁大眼晴——去发现可突破的机会。 《大长今》第七集，长今为帮助朋友，私自出宫犯了戒律，被发配到&amp;quot;多栽轩&amp;quot;种药草。凡被赶出宫的人，肯定再也没有机会回到宫中了，长今几乎绝</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16932/message.aspx</guid><category></category><author>xlfu</author></item><item><title>六个感人小故事</title><pubDate>Wed, 28 Feb 2007 13:27:42 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16865/message.aspx</link><description>1:一朵玫瑰花 有位绅士在花店门口停了车，他打算向花店订一束花，请他们送去给远在故乡的母亲。 绅士正要走进店门时，发现有个小女孩坐在路上哭，绅士走到小女孩面前问她说： 「孩子，为什么坐在这里哭？」 「我想买一朵玫瑰花送给妈妈，可是我的钱不够。」孩子说。绅士听了感到心疼。 「这样啊??」于是绅士牵著小</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16865/message.aspx</guid><category></category><author>xlfu</author></item><item><title>如何成为一位杰出的工程师-HowtobeaStarEngineer</title><pubDate>Wed, 28 Feb 2007 12:36:42 GMT</pubDate><link>http://blog.ednchina.com/xlfu/16855/message.aspx</link><description>如何成为一位杰出的工程师-How to be a Star Engineer Robert E. Kelley, Carnegie Mellon University (Robert E. Kelley, &amp;quot;How to be a star engineer,&amp;quot; IEEE Spectrum, pp.</description><comments></comments><guid>http://blog.ednchina.com/xlfu/16855/message.aspx</guid><category></category><author>xlfu</author></item><item><title>天龙八部</title><pubDate>Sat, 13 Jan 2007 11:52:18 GMT</pubDate><link>http://blog.ednchina.com/xlfu/13330/message.aspx</link><description>天龙八部 二十八天相关链接：十法界表【天龙八部】 “天龙八部”是佛经中常见的“护法神”。诸天和龙神为八部众的上首，故称。 天，梵语deva，包括三界的诸天（可参见“诸天”条）。中国古代把“龙”列为“四灵”之一，印度人称“龙”为Naga（那伽），形态与中国土生的“龙”略有区别，似是摩竭鱼（鲸鱼）与中国</description><comments></comments><guid>http://blog.ednchina.com/xlfu/13330/message.aspx</guid><category></category><author>xlfu</author></item><item><title>神话知识</title><pubDate>Sat, 13 Jan 2007 11:51:20 GMT</pubDate><link>http://blog.ednchina.com/xlfu/13329/message.aspx</link><description>因之前看过一部玄幻小说《北斗第八星》，其中描写了许多东西方诸神，遂对这些神之间的关系产生好奇 雅典娜vs天龙八部——不可不知的神话知识 http://www.qianlong.com/ 　2004-02-03 07:50:12  诸神性感登场 细腻演绎神话战争(桌面集)希腊篇 　　宙斯：希腊神话中的</description><comments></comments><guid>http://blog.ednchina.com/xlfu/13329/message.aspx</guid><category></category><author>xlfu</author></item><item><title>成年人必看的六个故事教你学会做人！(转载)</title><pubDate>Tue, 19 Dec 2006 12:55:44 GMT</pubDate><link>http://blog.ednchina.com/xlfu/10561/message.aspx</link><description> 1、 宽容 　　一只小猪、一只绵羊和一头乳牛，被关在同一个畜栏里。有一次，牧人捉住小猪，牠大声号叫，猛烈地抗拒。绵羊和乳牛讨厌牠的号叫，便说：「他常常捉我们，我们并不大呼小叫。小猪听了回答道：「捉你们和捉我完全是两回事，他捉你们，只是要你们的毛和乳汁，但是捉住我，却是要我的命呢! 　　立场不同、所</description><comments></comments><guid>http://blog.ednchina.com/xlfu/10561/message.aspx</guid><category></category><author>xlfu</author></item><item><title>金庸武侠经典诗词赏析-转贴</title><pubDate>Sat, 02 Dec 2006 17:43:39 GMT</pubDate><link>http://blog.ednchina.com/xlfu/8691/message.aspx</link><description>金庸武侠经典诗词赏析（上）1.青山相待，白云相爱。梦不到紫罗袍共黄金带。一茅斋，野花开，管甚谁家兴废谁成败。陋巷单瓢亦乐哉。贫，气不改！达，志不改！ 这是黄蓉相答樵子时所唱的曲子，我之所以喜欢它，是因为曲中之词有视富贵如浮云的豪气，又有隐居山林不求功名的洒脱。最后一句“贫，气不改！达，志不改！”更说</description><comments></comments><guid>http://blog.ednchina.com/xlfu/8691/message.aspx</guid><category></category><author>xlfu</author></item><item><title>关于数字地和模拟地的分割-转载</title><pubDate>Sat, 02 Dec 2006 15:12:56 GMT</pubDate><link>http://blog.ednchina.com/xlfu/8682/message.aspx</link><description>如何降低数字信号和模拟信号间的相互干扰呢？在设计之前必须了解电磁兼容(EMC)的两个基本原 则：第一个原则是尽可能减小电流环路的面积；第二个原则是系统只采用一个参考面。相反，如果系 统存在两个参考面，就可能形成一个偶极天线(注：小型偶极天线的辐射大小与线的长度、流过的电 流大小以及频率成正比)；而如</description><comments></comments><guid>http://blog.ednchina.com/xlfu/8682/message.aspx</guid><category></category><author>xlfu</author></item><item><title>上下拉电阻-转载</title><pubDate>Sat, 02 Dec 2006 11:35:44 GMT</pubDate><link>http://blog.ednchina.com/xlfu/8655/message.aspx</link><description>上下拉电阻的总结－转载上拉电阻： 1、当TTL电路驱动COMS电路时，如果TTL电路输出的高电平低于COMS电路的最低高电平（一般为3.5V），这时就需要在TTL的输出端接上拉电阻，以提高输出高电平的值。 2、OC门电路必须加上拉电阻，才能使用。 3、为加大输出引脚的驱动能力，有的单片机管脚上也常使</description><comments></comments><guid>http://blog.ednchina.com/xlfu/8655/message.aspx</guid><category></category><author>xlfu</author></item><item><title>PCB电磁兼容设计（转载）</title><pubDate>Sat, 02 Dec 2006 11:07:37 GMT</pubDate><link>http://blog.ednchina.com/xlfu/8654/message.aspx</link><description> 2.2 PCB的电磁兼容性设计 印制电路板(PCB)是电子产品中电路元件和器件的支撑件．它提供电路元件和器件之间的电气连接。随着电于技术的飞速发展，PGB的密度越来越高。PCB设计的好坏对抗干扰能力影响很大．因此，在进行PCB设计时．必须遵守PCB设计的一般原则，并应符合抗干扰设计的要求。要使电子</description><comments></comments><guid>http://blog.ednchina.com/xlfu/8654/message.aspx</guid><category></category><author>xlfu</author></item></channel></rss>